Using the Wireless Controller

You can operate the camcorder with the supplied wireless controller from a distance of up to 16 feet (5 m). Point it at the camcorder’s remote sensor when you press the buttons.

Following functions cannot be operated without the wireless controller:

•Some special playback modes ( 37)

•Photo/date search ( 85)

•Zero set memory ( 86)

•AV Insert ( 94)

•Audio dubbing ( 96)

•12 bit audio out/mix balance ( 98)

 

 

)

 

. (5

m

 

 

6

ft

 

1

 

 

E

❍Camcorder and wireless controller are equipped with 2 remote sensor modes

( 48). If the wireless controller does not work, check if camcorder and wireless controller are set to the same mode.

❍The wireless controller may not work properly in bright places, such as outdoors under direct sunlight, or when used too close to the camcorder.

❍The operable range of the wireless controller may shorten when the camcorder’s remote sensor is exposed to strong light.

❍When the batteries run out, replace both at the same time.

Inserting Batteries

The wireless controller operates with two AA batteries.

1.

Open the battery cover.

q

2.

Insert the batteries following the +

 

 

and – markings.

 

3.

Close the battery cover.

 

 

 

w

e

Mastering Basics the

23