Recording to a VCR or Digital Video Device 
You can copy your recordings by connecting the camcorder to a VCR or a digital video
device. If you connect a digital video device, you can copy recordings with virtually no generation loss in image and sound quality.
When connecting a VCR:
E
❍Make sure that “H” is not displayed on the screen. If “H” is displayed, change
the setting ( 
74).
❍The quality of the edited tape will be slightly lower than that of the original. When connecting a digital video device:
❍You can connect only one device to the camcorder with the DV cable.
❍Blank sections may be recorded as anomalous picture.
❍If the picture does not appear, reconnect the DV cable or turn the camcorder off and back on again.
❍Proper operation cannot be guaranteed for all digital video devices equipped with a DV terminal. If operation does not work, use the
Example: Recording to a VCR
CAMERA | PLAY (VCR) | CARD CAMERA | CARD CAMERA |
1.Connect the camcorder to the VCR.
See Playing Back on a TV Screen ( 
39).
2.Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
3.Connected device: Load a blank cassette and set the device to record pause mode.
4.Locate the scene you wish to copy and pause playback shortly before the scene.
5.Play back the tape.
6.Connected device: Begin recording when the scene you wish to copy appears. Stop recording when copying is complete.
7.Stop playback.
Editing
87