Three methods (metering modes) to measure the subject’s brightness are provided. Normally, evaluative metering is recommended.
In Basic Zone modes, automatic selection is set automatically.
1
2
Select [Metering mode].
Under the [z2] tab, select [Metering mode], then press <0>.
Set the metering mode.
Select the desired metering mode, then press <0>.
qEvaluative metering
This is a
wPartial metering
Effective when the background is much brighter than the subject due to backlighting, etc. The gray area in the left figure is where the brightness is metered to obtain the standard exposure.
The brightness is metered at the image center and then averaged for the entire scene. This metering mode is for advanced users.
With q(Evaluative metering), the exposure setting will be locked when you press the shutter button halfway and focus is achieved. With w(Partial metering) and
111