In Basic Zone modes, the camera will normally focus the closest subject automatically. Therefore, it may not always focus on your target subject. In the <d>, <s>, <f>, and <a> modes, you can select the AF point and use it to focus on the target subject.
1
2
Press the <S> button. (9)
XThe selected AF point will be displayed on the LCD monitor and in the viewfinder.
Select the AF point.
Use the <S> cross keys to select the AF point.
While looking through the viewfinder, you can select the AF point by turning the <6> dial until the desired AF point lights up in red.
When all the AF points light up, automatic AF point selection will be set. The AF point will be selected automatically to focus on the subject. Pressing <0> toggles the AF point selection between the center AF point and automatic AF point selection.
3 Focus on the subject.
Aim the selected AF point over the subject and press the shutter button halfway to focus.
95