Preparing to Print

wPictBridge

6 Play back the image.

 

Press the <x> button.

 

X The image will appear, with the <w>

 

icon on the upper left of the screen to

 

indicate that the camera is connected

 

to a printer.

Before using the printer, make sure it has a PictBridge connection port. Movies cannot be printed.

The camera cannot be used with printers conforming only to CP Direct or Bubble Jet Direct.

Do not use any interface cable other than the one provided.

If there is a long beeping sound in step 5, it indicates a problem with the printer. Resolve the problem displayed in the error message (p.248).

You can also print RAW images taken with this camera.

If you use a battery pack to power the camera, make sure it is fully charged. With a fully-charged battery pack, you can print for approx. 2 hr. 40 min.

Before disconnecting the cable, first turn off the camera and printer. Hold the plug (not the cord) to pull out the cable.

For direct printing, using AC Adapter Kit ACK-E10 (sold separately) to power the camera is recommended.

241