Installing and Removing the Battery and Card
When the access lamp is lit or blinking, it indicates that images are being written to or read by the card, being erased, or data is being transferred. Do not open the card slot/battery compartment cover. Also, never do any of the following while the access lamp is lit or blinking. Otherwise, it can damage the image data, card, or camera.
•Removing the card.
•Removing the battery.
•Shaking or banging the camera around.
If the card already contains recorded images, the image number may not start from 0001 (p.184).
If a
If you can transfer all the images on the card to a computer, transfer all the images, then format the card with the camera (p.50). The card may then return to normal.
Do not touch the card’s contacts with your fingers or metal objects. Do not expose the contacts to dust or water. If a smudge adheres to the contacts, contact failure may result.
The camera cannot use MultiMediaCards (MMC). (A card error will appear.)
34