With a PictBridge printer, you can easily print images with DPOF.
1Prepare to print.
See page 240.
Follow the “Connecting the Camera to a Printer” procedure up to step 5.
2Under the [x1] tab, select [Print order].
3Select [Print].
[Print] will be displayed only if the camera is connected to a printer and printing is possible.
4Set the [Paper settings] (p.242).
Set the printing effects (p.244) if necessary.
5Select [OK].
Before printing, be sure to set the paper size. Certain printers cannot imprint the file number.
If [Bordered] is set, certain printers may imprint the date on the border. Depending on the printer, the date may appear faint if it is imprinted on a bright background or on the border.
Under [Adjust levels], [Manual] cannot be selected.
If you stopped the printing and want to resume printing the remaining images, select [Resume]. Note that printing will not resume if any of the following are the case:
•You changed the print order of or deleted any print ordered images before resuming the printing.
•When index is set, you changed the paper setting before resuming the printing.
•The card’s remaining capacity was low when you paused the printing. If a problem occurs during printing, see page 248.
252