Canon C50 - page 20

Canon MultiPASSC50 Getting Started ENGLISH

II-3

ADocument feed lever

Set this lever to the left ( ) for automatic document feed, or to the right ( )

for manual document feed.

BRECEIVE MODE button

Use this button to select whether the MultiPASS C50 is set to receive faxes

manually (”MANUAL MODE”), to treat all calls as faxes (”FAX ONLY

MODE”), to use an answering machine to receive all calls (”ANS.

MACHINE MODE”), or to automatically switch between telephone and fax

receiving, depending on the type of call (”Fax/Tel Mode”).

CLCD display

This displays messages and prompts during operation, and displays selections,

text, numbers, and names when registering information.

DRESOLUTION button

Press this button to select the resolution the MultiPASS C50 will use for the

document you want to fax, copy, or scan.

EOne-Touch Speed Dial/Special Function buttons

Use these buttons for one-touch speed dialling, entering user information, and

to perform special operations. See pages 2-25 and 2-26 for details on the

special function buttons.

FNumeric buttons

Use these buttons to type numbers and names when entering information, and

to dial fax/telephone numbers that are not registered for automatic dialling.

G(REDIAL)/PAUSE button

Press this button to redial the last number that was dialled using the number

buttons, or to enter pauses between digits when dialling fax numbers.

HCODED DIAL button

Press this button (followed by entering a two-digit code with the numeric

buttons) to dial a fax number that you have registered for coded speed

dialling.

I(START/COPY) button

Press this button to begin sending, receiving, scanning, or other operations, or

to select functions when registering information.

JALARM lamp

This lamp ﬂashes when an error occurs, when the MultiPASS C50 is out of

paper or ink.

K(STOP) button

Press this button to cancel sending, receiving, or any other operation.