Getting Started 17

Getting Started

Charging the Battery Pack

The camcorder can be powered with a battery pack or directly using the compact power adapter. Charge the battery pack before use.

BATT. switch

1Turn off the camcorder.

2Attach the battery pack to the camcorder.

Open the LCD panel.

Slide in the connector end of the battery in the direction of the arrow and press it gently until it clicks.

CHG (charge) indicator

DC IN terminal

3Connect the power cord to the compact power adapter.

4Plug the power cord into a power outlet.

5Connect the compact power adapter to the camcorder’s DC IN terminal.

The CHG (charge) indicator starts flashing. The indicator will stay on when the charging is completed.

You can also use the compact power adapter without attaching a battery pack.

When the compact power adapter is connected, even if a battery is attached its power will not be consumed.

ONCE THE BATTERY IS FULLY CHARGED

1Disconnect the compact power adapter from the camcorder.

2Unplug the power cord from the power outlet and the compact power adapter.

TO REMOVE THE BATTERY PACK

Slide down BATT. to release the battery pack, and pull out the battery pack holding it from the ridge on its bottom part.

IMPORTANT

Turn off the camcorder before connecting or disconnecting the compact power adapter. After

you turn off the power switch to , important file allocation data is updated on the disc. Be sure to wait until the LCD display is completely off.

You may hear some noise from the compact power adapter during use. This is not a malfunction.

We recommend charging the battery pack in temperatures between 10 °C and 30 °C. Outside the temperature range of 0 °C to 40 °C, the charging will not start.

Do not connect to the camcorder’s DC IN terminal or to the compact power adapter any electrical equipment that is not expressly recommended for use with this camcorder.

To prevent equipment breakdowns and excessive heating, do not connect the supplied

Preparations

Page 17
Image 17
Canon DC211, DC201, DC210 instruction manual Getting Started, Charging the Battery Pack, Preparations