manually. To play back on a TV with normal aspect ratio (4:3) change the [TV TYPE] setting accordingly ( 38).

Taking Photos

( 10)

1Move the power switch to ON to set the camcorder in CAMERA mode. The red CAMERA indicator will turn on.

2Move the lens cover switch down to

to open the lens cover.

3Move the / switch to the (Still images) position.

4Press PHOTO halfway.

Once the focus is automatically adjusted, will turn green and one or more AF frames will appear.

5 Press PHOTO fully.

The DISC access indicator will flash as the still image is being recorded.

Recording 27

IMPORTANT

Avoid the following actions while the disc

access display ( ) appears on screen, and when the DISC access indicator is on or flashing. Failing to do so may result in permanent data loss.

-Do not subject the camcorder to vibrations or strong impacts.

-Do not open the disc cover and do not remove the disc.

-Do not disconnect the power source or turn off the camcorder.

-Do not change the position of the / switch or the operating mode.

NOTES

If the subject is not suitable for autofocus, turns yellow. Adjust the focus manually

( 43).

Basic Functions

Page 27
Image 27
Canon DC201, DC210, DC211 instruction manual Taking Photos, Press Photo fully