Canon DC210, DC201 Zooming, Quick Start Function, Press Quick Start firmly, 800x Only Zoom out

28Recording

Zooming

POINTS TO CHECK

( 10)

: In addition to the optical zoom, the digital zoom is also available ( 35).

Optical zoom		35x		30x
Digital zoom*		1,000x		800x
*	only.
			Zoom out

Zoom in

Optical Zoom

( 35x, 30x)

Move the zoom lever toward W to zoom out (wide-angle). Move it toward T to zoom in (telephoto).

You can also change the zoom speed

( 35). You can select one of three fixed zoom speeds or a variable speed that depends on how you operate the zoom lever: Press gently for a slow zoom; press harder for faster zooms.

NOTES

When set to [VARIABLE], the zoom speed will be faster in the record pause mode.

Keep at least 1 m to the subject. At wide-angle, you can focus on a subject as close as 1 cm.

Quick Start Function

Using the Quick Start function, you’ll never have to miss out on those great and fleeting opportunities to take a picture or record video. When you press

QUICK START instead of turning off the camcorder, you can get it ready to start recording within approx. 1 second.

POINTS TO CHECK

( 10)

: You cannot enter the Quick- Start ready mode while recording.

1 Press QUICK START firmly.

•The standby lamp goes on to signal that the camcorder is Quick-Start ready - “ready and waiting” to resume recording.

•Sometimes the standby lamp will flash as the camcorder completes some preparations. The camcorder is Quick-Start ready when the lamp stops flashing and stays on.

2When you wish to resume recording, press QUICK START again.

Within approx. 1 second, the camcorder is ready in record pause mode.