Menu Options Lists
38
System Setup (Volume, Beep, etc.)
SYSTEM SETUP
[ HIGH VOLUME],
[ LOW VOLUME], [ OFF]
A beep will accompany some operations
like turning on the camcorder, the self-
timer countdown, etc. It also serves as a
warning beep under unusual conditions.
[ON], [ OFF]
In order to save power when the
camcorder is powered by a battery pack,
it will automatically shut off if left without
any operation for 5 minutes.
Approximately 30 seconds before the
camcorder shuts off, the message
AUTO POWER OFF” will appear.
In Quick-Start ready mode, the
camcorder will shut off after the time
selected for the [ STANDBY OFF]
setting.
[ 10 min], [ 20 min],
[ 30 min]
Select the length of time after which the
camcorder will end the Quick-Start ready
mode and shut off automatically.
[ RESET], [CONTINUOUS]
Select the image numbering method to be
used on a new disc.
Images are automatically assigned
consecutive image numbers from 0101 to
9900, and stored in folders containing up
to 100 images. Folders are numbered
from 101 to 998.
[ RESET]: Image numbers will restart
from 101-0101 every time you insert a
new disc.
[ CONTINUOUS]: Image numbers will
continue from the number following that
of the last image recorded with the
camcorder.
If the disc you insert already contains
an image with a larger number, a new
image will be assigned a number one
higher than that of the last image on the
disc.
We recommend using the
[ CONTINUOUS] setting.
[ NORMAL TV],
[ WIDE TV]
In order to display the picture in full and in
the correct aspect ratio, select the setting
according to the type of television to
which you will connect the camcorder.
[ NORMAL TV]: TV sets with 4:3
aspect ratio.
[ WIDE TV]: TV sets with 16:9
aspect ratio.
When the TV type is set to
[ NORMAL TV], if you play back a
recording made in widescreen (16:9) the
picture displayed on the LCD screen will
be smaller than the full display area.
VOLUME
( 30)
BEEP
POWER SAVE
STANDBY OFF
( 28)
FILE NOS.
TV TYPE