Canon DC210 Disc cannot be ejected, Off the camcorder and let it cool down before resuming use

64Trouble?

	Problem	Solution
The disc cannot be ejected.		Turn off the camcorder, disconnect the compact power adapter	–
		and remove the battery pack. Restore the power supply and try
		again.
		The camcorder has exceeded its operational temperature. Turn
		off the camcorder and let it cool down before resuming use.
The disc cannot be recognized.		The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If	70
		the problem persists replace the disc.
		The disc is not correctly loaded. Check the disc.	19
		Verify that the camcorder supports the type of DVD disc you	3
		inserted.
The camcorder vibrates.		Depending on the condition of the disc, the camcorder might	–
		vibrate occasionally. This is not a malfunction.
•	The disc’s rotation can be	The disc is activated from time to time. This is not a malfunction.	–
	faintly heard.
•	Occasionally the operation
	sound can be heard.
After using the camcorder for a		This is not a malfunction. Turn the camcorder off and let it cool	–
long time, “ ” lights up in red.		for a while before resuming operation.
Recording

Problem		Solution
Image will not appear on the	Set the camcorder to	.	25
screen.
	Open the lens cover.
“SET THE TIME ZONE, DATE	Set the time zone, date and time.		23
AND TIME” appears on the
	Recharge the built-in lithium battery and set the time zone, date		70
screen.
	and time.
Pressing the start/stop button	Set the camcorder to	.	25
will not start recording.
	Load a recommended disc.		4
	The disc is full (“ END” flashes on the screen). Delete some		19
	recordings (DVD-RW in VR mode) to free some space or		52
	replace the disc.
	The camcorder has exceeded its operational temperature. Turn		–
	off the camcorder and let it cool down before resuming use.
	Remove the disc protection.		54
	Unfinalize the disc (DVD-RW in VIDEO mode).		60
Even after stopping recording,	The scene or still image is being recorded on the disc. This is		25
the disc access indicator does	not a malfunction.		27
not go off.
The point where the start/stop	There is a slight interval between pressing the start/stop button		–
button was pressed does not	and the actual start of the recording on the disc. This is not a
match the beginning/end of the	malfunction.
recording.