Playback
Basic Functions
31
IMPORTANT
The following may not be displayed correctly.
- Images not recorded with thi s camcorder.
- Images edited on or uploade d from a
computer.
- Images whose file names hav e been
changed.
Avoid the following actions while the disc
access display ( ) appears on screen, and
when the DISC access indicator is on or
flashing. Failing to do so may result in
permanent data loss.
- Do not subject the camcorder t o vibrations or
strong impacts.
- Do not open the di sc cover and do not remove
the disc.
- Do not disconnect the p ower source or turn off
the camcorder.
- Do not change the position of the /
switch or the operating mode.
Slideshow
1Press .
2Select ( ) [ SLIDESHOW] and
press ( ).
3Select ( ) [START] and press
().
• Images are played back one after
another.
• Press to stop the slideshow.
Index Screen
1Move the zoom lever toward W.
The still images index screen appears.
2Select ( , ) an image.
• Move the green selection frame to
the image you want to view.
• If you have a lot of still images, you
may find it easier to browse entire
index pages instead. Move the zoom
lever toward
W
to extend the green
selection frame to the whole page, and
move ( ) between index pages.
Move the zoom lever toward
T
to return
to moving between single images.
3Move the zoom lever toward T.
The index screen closes and the
selected image is displayed.
Image Jump Function
You can also quickly locate a specific
image without having to browse all of
them one by one.
T
O
RUN
THROUGH
THE
STILL
IMAGES
Push the joystick ( ) or ( ) and hold
it pressed down to run quickly through
the still images.
T
O
SKIP
10
OR
100
STILL
IMAGES
1If the joystick guide does not appear
on screen, press ( ) to display it.
2Push the joystick ( ) toward .
3Select ( ) [ JUMP 10 IMAGES]
or [ JUMP 100 IMAGES].
4Jump ( ) the number of images
selected.
Press ( ) to close the image jump
screen and display the image. You can
press ( ) again to hide the joystick
guide.
SLIDESHOW
FUNC.
(22)
FUNC.
FUNC.