Playback
Basic Functions
29
NOTES
When you wake up the camcorder from
standby mode, the following settings will be
changed automatically:
- Manual focus returns to automatic foc us (AF).
- Manual exposure adjustment retu rns to
automatic exposure.
- Zoom position returns to full w ide angle
W
.
In standby mode, the camcorder consumes
only half the power used in record pause mode.
Using this mode you can save energy when
using a battery pack.
The camcorder will shut off if left in the Quick-
Start ready mode for 10 minutes, regardless of
the [POWER SAVE] setting ( 38). You can
select the length of time until shut-off with the
[ STANDBY OFF] setting ( 38).
To restore the power if the camcorder shut off,
slide the power switch toward MODE and
release it, or move the power switch to and
back to ON again.
If you perform any of the following actions
while in standby mode (while the standby lamp
is on), the camcorder will return to record pause
mode.
- Open the disc compartment cover.
- Slide the power switch toward MODE.
- Change the position of the / switch.
Playback

Playing Back the Video

1Move the power switch to ON, then
slide it down toward MODE and
release it to set the camcorder in
PLAY mode.
The green PLAY indicator will turn on.
2Move the / switch to the
(Movies) position.
The scene index screen appears with
the selection frame on the first scene.
3Move ( , ) the selection frame
to the scene you want to play back.
Press or on the camcorder to
move to the next/previous index page.
4Press to begin the playback.
The playback will start from the scene
selected and continue until the end of
the last scene recorded.
D
URING
P
LAYBACK
5Press again to pause the
playback.
6Press to stop the playback and
return to the scene index screen.
NOTES
During the playback of a DVD-R DL (dual-
layered) disc, you might notice a brief stop
Playback
( 10)
/
/