Built-in speaker and headphone terminal | Canon DM-GL1 specification

Indicators that appear in the LCD display when “mirror” is selected:

REC

REC PAUSE

EJECT

• All indicators appear normally in the viewfinder.

Built-in speaker and headphone terminal

E

The camcorder has a built-in speaker and a headphone terminal so you can review the sound track alongside the picture during playback. Use the speaker or headphones when viewing playback with the LCD screen, and use headphones when viewing with the viewfinder. The built-in speaker is monaural; use headphones for stereo sound.

VOLUME

Quick Overview

Adjust the speaker and headphone volume with the +/– VOLUME buttons.

•Press the + button to increase the volume, and the – button to lower the volume.

•A VOLUME bar appears in the display to indicate the current volume. It disappears in four seconds.

•You can turn off the volume completely by pressing the – button until OFF appears.

•You can also adjust the headphone volume separately from the built-in speaker, either during VCR mode or camera mode. The volume level is the same regardless of mode.

•The levels you adjust for the built-in speaker and headphones are memorized separately. The camera remembers your levels even if you slide the POWER switch to OFF.

Notes:

•The speaker turns off when the camera is set to camera mode or when you use headphones.

•Sometimes the playback picture becomes rough with “noise”, when the volume is turned up high. If this happens, turn down the volume.

27

Image 27

Canon DM-GL1 instruction manual Built-in speaker and headphone terminal

Contents

Mode d’emploi Introduction Important Usage Instructions Important Safety Instructions Introduction Contents Getting started Thank you for Choosing a Canon Introducing the GL1 OverviewQuick Finding Your Way Around the GL1 Quick Overview Quick Overview Slow GL1 System Diagram Availability differs from area to area WD-58 Wide-converter Optional AccessoriesBattery Packs CB-900 Car Battery Adapter 220EX Speedlite 380EX Speedlite 550EX Speedlite VL-10Li Battery Video LightCH-910 Dual Battery Charger/ Holder HC-4000 System Case Attaching the Lens Hood Remove the lens capFinally, tighten the locking screw Attach the DC coupler to the camera Powering the GL1Connecting the camera to an AC outlet Provide power from an AC outlet or Charge a battery pack Charging and attaching the battery pack Attach the battery pack to the power adapterRemove the battery pack after use CA-910 Compact Power Adapter Loading a Cassette Loading and unloadingLoad or unload the cassette Protecting tapes from accidental erasure Handling cassettesCassette memory Using the Standby lever Before you start recordingTo record Changing the recording mode SP/LP When you have finished recording Confirmation/Warning beeps Demonstration modeTurning the camera recording displays ON/OFF Microphone attenuator Zooming 20⋅ optical zoom40⋅/100⋅ digital zoom Using the LCD Screen Open the LCD screenChanging the angle of the LCD screen Adjusting the LCD screen Allowing the subject to monitor recordingAbout the LCD Screen Built-in speaker and headphone terminal Other playback modes Attach a power source and slide the Power switch to VCRPlaying Back a Cassette Load the cassette Press the Play e button to start playback Special playback Connections for Playback on a TV Screen If your TV or VCR has an S-video input terminalIf your TV or VCR has audio/video input terminals Sound recording Using a tripodTips for Making Better Videos Holding the camera Composition Picture angleCamera moves Turning the Optical Image Stabilizer Off VCR menu Selecting from the Menus Menu Inserting batteries Using the Wireless Controller/Tally Lamp Setting the remote sensor mode Turning off the tally lamp Open the menu and select T.ZONE/DST Press the menu dial Setting the Date and TimeSetting the time zone/daylight saving time Set the camera to record pause mode Setting the clock Setting the display style Date and time displaySix-second auto date Filter Using the ND Filter Press the Photo button fully down to take the still picture Taking Still Pictures Photo Mode Using the Full Range of Features Flash Charging Using a Canon Speedlite for Flash Photography optional Choosing the Movie Mode Normal/Frame Searching and Reviewing While Recording Record searchRecord review Using the Various Recording Programs Easy RecordingAvailability of functions in each recording program Giving priority to shutter speed shutter-priority Tv Auto Spotlight Giving priority to the aperture aperture-priority AvManual See also p Sand & Snow Using Digital Effects Widescreen TV recording Operating the digital effectsPress the D.E. ON/OFF button Press the start/stop button to start/stop recording Selecting the audio mode Audio RecordingWind screen Setting the Self-Timer Press the start/stop buttonPress the start/stop button to end recording Press the Exposure dial in once more Manual Exposure AdjustmentPress the Exposure dial in again Turn the Exposure dial to open or close the iris About the shutter speed Exposure lock Exposure lock/adjustment Adjusting the Focus Temporary focus overrideManual focus Close the menu Using AE Shift Adjusting Camera Sharpness Adjusting Color Phase Using the Zebra Pattern Adjusting the White Balance Setting the white balanceTo set the white balance manually Using the Full Range of Features Displaying Data Code Date/Time Searching the Tape Photo Search/Date Search Returning to a Pre-Marked Position Connect the camera to the VCR Setting the camera to control your VCRDubbing Function Preparing for Dubbing Using the Dubbing Function for the First Time Preparations & setting upSetting Recorder Recorder Make sure you are in DUB Mode see p Dubbing to a VCRPress e on the body of the camera Adjust the setting Cut-In and Cut-Out AdjustmentsSetting the Cut-In and Cut-Out Adjustments Open the REC.SET UP menu and point the arrow at CUT-IN ADJ Basic editing Simple Editing to a VCRPreparations Prepare the TV and VCR Copyright signal Dubbing with Digital Video EquipmentDV terminal/connections Connect the camera to the VCR, TV or other camcorder Recording from a VCR, TV or Other Camcorder Analog Line-in Repeat steps 1 to 5 until your edited recording is complete Press the pause button Recording Over Existing Scenes A/V Insert Editing Tape in the cameraPlayback tape Press the stop button of the VCR Press the A/V Insert button on the wireless controller Audio Dubbing To connect other audio equipmentTo connect the external microphone Press Audio DUB. on the wireless controller Attach the shoulder strap Adjust the viewfinderAdjust the grip belt Preparing the Camera Charging and recording times How much power is left?Remaining time indicator When to recharge Storing the battery pack Taking care of the battery packCharging the backup battery Keep the terminals clean Treat the battery pack with care Set the camera to VCR mode Choose the output Setting the Audio Mix Selecting audio output channels Low-angle recording Camera Holding StylesChoose the grip Standard holding style Storage Maintenance Using the camera abroad Maintenance What you should do What happens when condensation is detectedCondensation Protecting the camera from condensation ? The start/stop button doesn’t work TroubleshootingRecording/Playback ? The camera turned itself off Recording/Playback Contd Miscellaneous About the LCD ViewfinderAbout the CCD Turning off the LCD screen displays Screen Displays Turned on p Manua L Recording reminder Time Code BP-915 Battery Pack Specifications 100 Index 101 Canon U.S.A., Inc Canon GL1 Digital Video Camcorder Limited Warranty Canada Canon INC