98
E
Additional
Information
Refer to page 20.
Refer to page 91.
Appears as a warning to
protect the tape and also
when condensation is
detected. Remove the tape
as soon as possible after
the camera has displayed
the caution.
Refer to page 75.
Refer to page 75.
Appears when you try to
do audio dubbing or A/V
insert on a tape recorded in
LPmode. Refer to
page 78, 80.
Appears when you try to
do audio dubbing on a tape
recorded in 16-bit audio or
12-bit, 4-channel mode.
Refer to page 80.
Appears when the camera
detects a blank section of a
tape during audio dubbing
or A/Vinsert. Refer to
page 78, 80.
SETTHE ETIM E,ZON
DATEANDTIME
CHANGE THE BATTERYPAC
K
TAPE END
ETAPEI
S
ER
THASET FOR
URSEPREENVT
ION
CON NDESATI ON
HAS BEEN DET C TED
E
REMOVETHE CAS ETT ES
RE
COPYD
PROTECTCTED
RIGHT
PLAYBACK I SSTRIE
RE
COPYD
PROTECT
CTED
RIGHT STRIE
DUBB IN
G
Caution phrases
The camera displays various caution phrases —
they appear for 4 seconds before disappearing.
When you start recording, the camera counts from
0SEC to 10SEC. Shots which are shorter than
10 seconds may be difficult to edit later. On the
other hand, if you are not planning to edit the
recording, remember that a shot which does not
contain action should generally last no longer than
10 seconds.
Time Code
0sec
10sec
34:
2:
10:56
Recording reminder
Appears each time you
turn the power on, until
you set the date and time
(p. 39).
Appears when the battery
pack is exhausted (p. 83).
Appears when the tape has
reached the end.
This records counter information, including hour,
minute, second, and frame number on a special
data code area on the tape itself. It is reset
automatically when a new tape is loaded. In
camera mode, the frame number doesn’t appear in
the display.
E
CHECCASSETT
KTHE
[]
LP MODE
E
CHECCASSETT
KTHE
[]
AUDI O MODE
E
CHECCASSETT
KTHE
[]
BLANK