Operation Panel
a Menu Key
Press this key to cycle the display through the various user modes, as shown below.
C o u | n t | O n l y | M o d e | T o t a l | C o u n t e r | ||
| O N |
| [ O F | F ] |
|
| 0 |
L o n | g | D o c u m e | n t | S i n g l e - P a s s D u p . | |||
| O N |
| [ O F F ] | [ O N ] | O F F | ||
S t a | n d - b y | M o | d e | U S B S h o r t | P a c k e t | ||
2 | 4 0 |
| 6 0 | [ 1 0 ] | [ O N ] | O F F | |
J a p | a n e s e |
|
| S C S I | S p e e d | ||
| O N |
| [ O F F ] | [ 2 0 ] | 1 0 | 5 | |
D i s | p l a y | C o n t r a s t |
|
|
| ||
b Set Keys
Use these keys to change the setting of the currently displayed user mode.
c Enter Key
Press this key to register the currently displayed user mode setting.
d Display Panel
Displays the number of scanned pages, error codes, etc.
e Job Keys
Use these keys to scroll through registered job numbers (01 through 99) on the display panel. Pressing the Start key while a job number is displayed starts the scanning of the document and forwards the scanned image to the destination registered for the job.
f New File Key
This key is active for applications that support batch separation. This key lights when pressed or in accordance with the application’s batch separation settings. Scanning the next document while this key is lit causes the scanned image to be stored in a different file or folder than the previously scanned document.
g Start Key
The Start key lamp lights when the key is enabled by the Count Only Mode or the application’s settings. Pressing the Start key while its lamp is lit causes scanning to start.
h Stop Key
Pressing this key stops an ongoing scanning operation. This key is also used to cancel a mode setting and clear an error indicator from the counter display area.
1
Scanner the Using Start You Before
13