4. Optional Products
The following options can be purchased and used on the
Stamp Unit
The stamp unit affixes a stamp on document pages that are scanned using the feeder. The application can be used to turn stamping on or off.
The stamp is a circle that has a diameter of about 0.1" (3 mm), with a cross in the center. It is stamped on the scanned side of the document page, approximately 0.4" (10 mm) from the trailing edge of the document page.
Hint
•The stamp pattern is fixed and cannot be changed.
•When scanning both sides of a document, the sides that are stamped will differ depending on the Single Pass Duplex setting of the scanner’s user mode settings. When the Single Pass Duplex setting is ON, only the front side of the document is stamped. When the Single Pass Duplex setting is OFF, both sides of the document are stamped.
•The cross in the center of the stamp rotates during stamping.
Stamp 
Position
Stamp 
Position
14