5. Scanning
Scanning operations can be controlled by a scanning application program such as the CapturePerfect 3.0 software included with the scanner, or directly from the control panel of the
This section describes the Job Function and provides an overview of CapturePerfect 3.0.
IMPORTANT
•When the conditions for scanning require a large amount of the computer’s memory, scanning may not be possible if the memory is insufficient. If a memory error appears during scanning, exit the application and change the scanning conditions before attempting to scan again.
•Configurations that use the computer’s memory include the following. If memory becomes insufficient, consider changing these configurations.
Mode
2
Basic
About the Job Function
The Job Function enables you to use the Job Registration Tool to register different jobs which can then be selected for scanning by pressing the Job key on the control panel.
Job registration stores scanning condition settings, image file format selection, save destination, and image data processing settings for each job to be used with the Job Function.
Hint
The Job Registration Tool is a
The Job function has the capabilities listed below, and jobs can be registered using the Job Registration Tool.
•Images can be saved to a shared folder or other specified folder.
•Images can be sent as
•Images can be output to a specified printer.
Save image to |
|
specified folder. | Output to printer |
(Network) |
| |
Send image as an | ||
|
■Executing Jobs
Use the following procedure to execute jobs that have been registered by the Job Registration Tool.
1.Set the Events function. (See “Setting the Events Function” on p. 27.)
2.From the Windows task bar, click [Start] ➔ click [All Programs] ➔ [Canon
Operation
25