IMPORTANT

See “Placing Documents onto the Scanner” on p. 19 for information about placing documents onto the scanner.

3.From the application you are using, execute the required command to start scanning.

Scanning starts.

4.When scanning of the document is complete, the application goes into the Ready Mode.

Hint

If paper feeding stops during scanning due to a system error or paper jam, make sure that the last page of the document was recorded properly before continuing to scan.

5.If you want to scan another document, place it onto the scanner, and then execute the required command from the application to resume scanning. To finish scanning, execute the required command from the application.

IMPORTANT

If you are using the feeder for scanning, be sure to remove ejected document pages from the document eject tray before scanning another document. Leaving a document in the document eject tray and scanning another document can cause a paper jam.

■Panel Feeding

With panel feeding, you execute the scan command from your application, and then use the scanner’s Start and Stop keys to control the scanning operation.

1.Select [Panel-Feeding] in [Feeding Option] on the scanner settings screen.

2.From the application you are using, execute the required command to start scanning.

The Start key lamp to lights green.

3.Place the document onto the scanner.

IMPORTANT

See “Placing Documents onto the Scanner” on p. 19 for information about placing documents onto the scanner.

4.Press Start.

5.When scanning of the document is complete, the scanner goes into the Ready Mode.

Hint

If paper feeding stops during scanning due to a system error or paper jam, make sure that the last page of the document was recorded properly before continuing to scan.

6.If you want to scan another document, place it onto the scanner, and then press Start to resume scanning. To finish scanning, press Stop.

IMPORTANT

If you are using the feeder for scanning, be sure to remove ejected document pages from the document eject tray before scanning another document. Leaving a document in the document eject tray and scanning another document can cause a paper jam.

2

Operation Basic

23