7. About the User Modes
You can configure the scanner settings with the user modes described below.
User Mode Functions
User mode functions are as follows:
■Count Only Mode
C o u n t | O n l | y | M o d e |
O N | [ | O F | F ] |
ON: Counts the number of pages in a document using
OFF: Normal Mode (default)
■Long Document Mode
L o n g D o c u m e n t
O N | [ O F F ] |
ON: Enables detection of documents up to 24.8" (630 mm) long for auto document size detection. (See “Documents” on p. 17.)
OFF: Enables detection of documents up to 17.0" (432 mm) long for auto document size detection (default).
IMPORTANT
•Processing speed may slow down when scanning while the Long Document mode is set.
•When scanning
•When using the Long Document mode, if you place a long document askew in the document tray, it will rub against both sides of the feeding path and may damage the document. Make sure to align the document straight when placing it in the document tray.
•When using the Long Document mode, jam detection may not work propery and document may be damaged. Be wary of paper jams when using Long Document mode.
•When scanning a document that is 17" (432 mm) or more in length, load the document one page at a time and scan.
■Stand-by Mode
S t a | n | d | - b y | M o d e | |
2 | 4 | 0 |
| 6 0 | [ 1 0 ] |
240:Scanner enters
60:Scanner enters
10:Scanner enters
■Display Language Mode
J a p a n e s e
O N | [ O F F ] |
ON: Japanese
OFF: English (default)
■Display Contrast Setting
D i s p l a y C o n t r a s t
Use the 
and 
keys to move the pointer ( 
) to the left for lighter contrast or to the right for darker contrast.
■Setting SCSI Transfer Speed
S C S | I | S p e | e | d |
[ 2 | 0 ] | 1 | 0 | 5 |
Set the maximum value for synchronous transfer speed for the SCSI interface.
20:20 Mbyte/sec (Ultra SCSI) (default)
38