Canon DR-7090C Operation Basic, ■ Setting the Events Function

■ Setting the Events Function 3. Select [Canon DR-7090C] and click [Properties].

The Job function will not function unless [DR7090C Job Tool] is specified for the scanner’s Events function in Windows. Before using the Job function, perform the following procedure to configure the scanner’s event settings.

1.Click the [Start] button, then select [Settings] - [Control Panel].

4. Click the [Events] tab.

2.Double-click [Scanners and Cameras].

The Scanners and Cameras dialog box appears.

Hint

The dialog box that appears may vary depending on the

Windows version you are using.

2

Operation Basic

27