3

4

5

Choose the number of copies.

Press the ., buttons to choose the number of copies to be printed.

You can specify 99 copies per image.

To choose other images to print at the same time, repeat Steps 2 and 3.

Total number of images currently set to be printed

Number of copies of the selected image

Print.

Press the p button to start printing.

The print output receptacle cover will open automaticallyHYwhen an image is printed.

During printing, the paper will pass in and out of

SEL

several times. Do not touch the paper

until it has been ejected into the print output

receptacle.

O

 

Do not allow 50 or more sheets to accumulate in

Pthe print output receptacle.

C

 

To cancel printing, press the b(BACK) button followed by the o button.

If the paper runs out, remove the cartridge.

Slide the cover lever up to open the cartridge cover.

Slide the cartridge lever down.

The cartridge will be ejected.

6

Insert a new cartridge (p. 7).

 

Do not eject the cartridge, open the cartridge cover, or close the print output receptacle cover right after turning on the power or while printing. It may result in equipment damage.

When the total number of copies for printing is set to 0 and you press the p button, the currently displayed image will print once.

If SELPHY is idle for 5 minutes, the power turns off in order to save energy (pp. 70, 71).

If the [Start DPOF printing] screen displays, refer to “Printing Images Using Digital Camera Specified Settings (DPOF Print)” (p. 67).

13