Printing from Your Mobile Phone
Use the (separately sold) Bluetooth Unit
1
2
Make sure that there is no memory card inserted and that no computer is connected to SELPHY.
Insert the Bluetooth unit.
Remove the cover attached to
Turn on SELPHY (p. 9).
3 |
| Transfer images from your mobile phone | |
| to SEL | . | |
|
| BluetoothHYunit blinks blue during data | |
|
| transmission. | |
|
| P rinting starts after data transmission is | |
|
| completed. | |
|
| For information about all Bluetooth settings, refer | |
| Up to approx. 10Om (33 ft.) |
| |
| C | to “Change the Bluetooth Functions” (p. 71). | |
|
|
|
During transmission, the blue light on the Bluetooth unit will blink. If transmission is interrupted, the blinking will cease. Follow the instructions on your mobile phone and try again.
The following conditions could cause slow transmission and cause transmission to fail, even within the 10 m range:
- There is an obstacle between the Bluetooth unit and the mobile phone
- There is interference from magnetic fields, static electricity, or radio waves in the area
The maximum file size that can be transmitted is 2 – 3 MB (varies depending on mobile phone). Data transmission time increases when data size is large. Therefore, the amount of time before
printing will also increase.
Depending on the mobile phone model you use, images saved on the memory card may not be printed.
Depending on the cartridge you use, the edges of the image may be cropped.
When a gold or silver cartridge is installed, you cannot print from a mobile phone.
Choose Canon
You cannot establish a wireless connection between a computer and SELPHY.
Movies,
SELPHY automatically sets the print orientation.
68