Once a document has been set into the ADF

2.Push the left edge of the document stack flush against the paper guide and as far under the ADF cover as possible.

•If the document is a standard size, align its top corner with the corresponding paper alignment mark on the document tray.

Paper Alignment Mark

3.Slide the movable paper guide lightly against the side of the stack.

•Shift the movable paper guide snugly up against the stack, but not so tightly that it crimps the stack.

Movable Paper Guide

NOTE	• Once a document has been set into the ADF, the
	document will be scanned according to the scanner
	software settings. The settings will vary among
	different software programs.
	• Continuous scanning can only be accomplished
	with application software supporting that
	function.

Canon FB1200S manual Once a document has been set into the ADF