Canon FB1200S manual Terminator Settings

• Terminator Settings

The terminator marks the last device in a daisy chain. It tells the computer that “this is the last device”. There are two types of terminator: a separate device that is attached to a SCSI device or an On/Off switch built into the SCSI device. This scanner has a built-in terminator. For a daisy chain to operate correctly, the terminator must be set to On for the last SCSI device , and Off for all other SCSI devices. A typical daisy chain is shown below.

First	Second		Third	Last
SCSI device	SCSI device		SCSI device	SCSI device
SCSI ID = 3	SCSI ID =	6	SCSI ID = 4	SCSI ID = 2

	Terminator On
Terminator Off

21