Canon FB1200S manual Slow scanning speed

Glossy color photo will not scan clearly

Cause:	Optical interference created by the photo adhering to document glass
	produces striped patterns
Solution 1:	Gently press down on the document cover
Solution 2:	Move the photo on the document glass to break the adhesion
Solution 3:	Clean the document glass (See p. 76)

Stripes appear on scan of publication

Cause:	Moiré effect from scan of publication at low resolution (print screen lines
	highlighted by optical interference, producing striped patterns). This effect
	may occur with particular combinations of printed matter screen line
	densities and scanning resolutions
Solution:	Rescan at different resolutions or turn on the [Descreen] option (See the
	ScanGear CS-S or Plug-in Module CS-S Users Guide electronic manual).

Whitened edges on image scanned from thick book

Cause:	Scanner employs an ultra-sensitive scanning unit that picks up ambient light
	entering around the edges of the book
Solution:	Cover the book and document glass with a dark cloth to prevent ambient
	light from affecting the scan

Slow scanning speed

Cause:	Resolution is set higher than necessary
Solution:	Lower the resolution.

71