Problems with the Automatic Document Feeder (ADF-S9)
Documents Are Not Scanning
Cause 1: ADF power not on
Solution: Ensure that the ADF option cable is correctly connected to the AC adapter and that the power cord is plugged into a functioning electrical outlet. (See p. 38)
Cause 2: | ADF connector cable not attached |
Solution: | Connect the ADF connector cable to the option cable as specified. (See p. 41) |
|
|
Cause 3: | [Document Feeder] not selected in ScanGear |
| Feeder] not selected in |
Solution: | Select [Document Feeder] in ScanGear |
| |
|
|
Cause 4: | Document(s) incorrectly placed in ADF |
Solution: | Reposition the document(s) correctly. (See p. 44) |
|
|
Cause 5: | ADF cover not closed properly |
Solution: | Close the ADF cover completely. |
|
|
Cause 6: | Paper jam |
Solution: | Clear the paper jam. (See p. 49) |
|
|
Frequent Misfeeds
Cause 1: | Paper dust accumulated on separator or separator damaged |
Solution: | Clean the separator. (See p. 58) |
|
|
72
