Scanning unit fails to return to ready position (rear of scanner)
Cause: | Power cord fell out of contact with the electrical outlet or the AC adapter |
| was unplugged from the scanner while scanning unit in motion |
Solution: | Clear all documents and objects from the document glass, close the document |
| cover, unplug the power cord from the electrical outlet and then plug it back in |
|
|
Scan quality is poor
Cause 1: | Document cover is open |
Solution: | Close the document cover (and cover thick documents with a dark cloth) |
|
|
Cause 2: | Original document floating on document glass |
Solution: | Gently press down on the document cover to prevent floating |
|
|
Cause 3: | Improperly closed or floating document cover |
Solution: | Hold document cover down with hand during scan |
|
|
Cause 4: | Dirty document glass or document cover |
Solution: | Clean document glass or document cover (See p. 76) |
|
|
Cause 5: | Incorrect scan settings |
Solution: | Rescan with adjusted settings (See the ScanGear |
| Users Guide electronic manual) |
|
|
Cause 6: | A power cord is too close to the scanner |
Solution: | Move all power cords away from the top of the scanner and surrounding |
| area |
|
|
70
