Still Images

Specific Shutter Speeds and Aperture Values (M Mode)

Follow these steps before shooting to set your preferred shutter speed and aperture value to obtain the desired exposure.

For details on available shutter speeds and aperture values, see “Specifications” (p. 34).

Enter Dmode.

Set the mode dial to D.

Configure the setting.

Aperture Value Shutter Speed

Standard

Exposure Level

Exposure Level

Mark

Exposure Level

Indicator

Turn the zdial to set the shutter speed, and turn the 7dial to set the aperture value.

An exposure level mark based on your specified value is shown on the exposure level indicator for comparison to the standard exposure level.

The exposure level mark is shown in orange when the difference from standard exposure exceeds 2 stops. “–2” or “+2” is displayed in orange in the lower right when you press the shutter button halfway.

•After you set the shutter speed or aperture value, the exposure level may change if you adjust the zoom or recompose the shot.

•Screen brightness may change depending on your specified shutter

speed or aperture value. However, screen brightness remains the same when the flash is up and the mode is set to h.

•To have both the shutter speed and aperture value automatically

adjusted to obtain standard exposure, hold the shutter button halfway and press the button. Note that standard exposure may not be possible with some settings.

130