Canon G1 X Correcting Red-Eye

Editing Still Images

Correcting Red-Eye

Automatically corrects images affected by red-eye. You can save the corrected image as a separate file.

Choose [Red-Eye Correction].

Press the nbutton, and then choose [Red-Eye Correction] on the 1tab (p. 45).

Choose an image.

Press the qrbuttons or turn the 7dial to choose an image.

Correct the image.

Press the mbutton.

Red-eye detected by the camera is now corrected, and frames are displayed around

corrected image areas.

Enlarge or reduce images as needed. Follow the steps in “Magnifying Images” (p. 149).

Save as a new image and review.

 Press the opqrbuttons or turn the 7dial to choose [New File], and then press the m button.

The image is now saved as a new file.

Follow step 5 on p. 164.

• Some images may not be corrected accurately.

• To overwrite the original image with the corrected image, choose [Overwrite] in step 4. In this case, the original image will be erased.

•Protected images cannot be overwritten.

•RAW images cannot be edited this way.

•Red-eye correction can be applied to JPEG images shot in , but the original image cannot be overwritten.

168