
Special Modes for Other Purposes
Using the Wink
Aim the camera at a person and press the shutter button all the way down. The camera will shoot about two seconds after a wink is detected.
Choose .
Follow steps 1 – 2 on p. 72 and choose , and then press the
button.
Press the qrbuttons or turn the 7dial to choose , and then press the
button.
Compose the shot and press the shutter button halfway.
Make sure a green frame is displayed around the face of the person who will wink.
Press the shutter button all the way down.
The camera now enters shooting standby mode, and [Wink to take picture] is displayed.
The lamp blinks and the
Face the camera and wink.
The camera will shoot about two seconds after detecting a wink by the person whose face is inside the frame.
To cancel shooting after you have triggered the
• If the wink is not detected, wink again slowly and deliberately.
• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
•Closing and opening both eyes at once will also be detected as a wink.
•If winking is not detected, the camera will shoot about 15 seconds later.
•To change the number of shots, press the op buttons after choosing in step 1. [Blink Detection] (p. 68) is only available for the final shot.
•If no one is in the shooting area when the shutter button is pressed all the way down, the camera will shoot after a person enters the shooting area and winks.
87