Adjusting Basic Camera Functions

Customizing the Start-up Screen

Access the [Start-up Image] screen in Playback mode.

Press the 1button.

Following the previous procedure, choose [3] and press the mbutton.

Choose one of your shots.

Choose an image and press the mbutton. After [Register?] is displayed, choose [OK] (either press the qrbuttons or turn the 7 dial), and then press the mbutton.

•The previous start-up setting is overwritten when you assign a new

start-up image.

• You can assign the operating sounds and start-up images for your camera from the included software. For details, refer to the Software Guide.

Formatting Memory Cards

Before using a new memory card or a card formatted in another device, you should format the card with this camera.

Formatting erases all data on a memory card. Before formatting, copy images on the memory card to a computer, or take other steps to back them up. An Eye-Fi card (p. 216) contains software on the card itself. Before formatting an Eye-Fi card, install the software on a computer.

Access the [Format] screen.

Choose [Format], and then press the m button.

Choose [OK].

Press the qrbuttons or turn the 7dial to choose [OK], and then press the mbutton.

175