Specific Shutter Speeds and Aperture Values (M Mode)

• D: Manual

• Calculation of standard exposure is based on the specified metering method (p. 98).

•You can customize camera operation so that turning the 7dial changes shutter speed and turning the zdial changes the aperture value (p. 133).

Adjusting the Flash Output

Choose from the three flash levels in Dmode.

Enter Dmode.

Set the mode dial to D.

Configure the setting.

Raise the flash, press the rbutton and

immediately turn the zdial to choose the flash output level, then press the mbutton.

Once the setting is complete, Xis displayed.

• You can also set the flash level by choosing X in the FUNC. menu (p. 44), or by accessing n (p. 45) and choosing [Flash Output] in [Flash Control] on the 4tab.

•You can set the flash level in Mor Bmode by accessing n (p. 45), choosing [Flash Control] on the 4tab, and then setting [Flash Mode] to [Manual].

•You can also access the [Built-in Flash Settings] n screen as follows (except when an external flash (sold separately) is attached to the camera).

-Press and hold the rbutton for at least one second.

-When the flash is up, press the rbutton and immediately press the n button.

131