Customization for Shooting Styles

Still Images

Movies

Assigning Functions to the Button

Access the setting screen.

Press the nbutton, choose [Set Shortcut button] on the 4tab, and then press the m button (p. 45).

Configure the setting.

Press the opqrbuttons or turn the 7dial to choose a function to assign, and then press the mbutton.

Use the assigned function as needed.

Press the button to activate the assigned function.

• To restore default settings, choose .

• Icons labeled with indicate that the function is not available in the current shooting mode or under current function conditions.

•When the or function is used, each press of the button records white balance data (p. 105), and the white balance settings change to or .

•When the %function is used, each press of the button adjusts and locks the focus, and %is displayed on the screen.

•Pressing the button when the function is used deactivates screen display. To restore the display, do any of the following.

-Press any button (other than the ON/OFF button)

-Hold the camera in another orientation

-Open and close the screen

-Raise and lower the flash

135