
Image Categories
Choose a category.
Press the opbuttons to choose the
category, and then press the mbutton. is displayed.
To cancel selection, press the mbutton again. is no longer displayed.
Repeat this process to choose additional images.
Finish the setup process.
Press the nbutton. A confirmation message is displayed. Press the qrbuttons
or turn the 7dial to choose [OK], and then press the mbutton.
•Images will not be assigned to a category if you switch to Shooting mode
or turn the camera off before finishing the setup process in step 4.
Selecting a Range
Choose [Select Range].
Following step 2 on p. 162, choose [Select Range] and press the mbutton.
Choose images.
Follow steps 2 – 3 on p. 154 to specify images.
Choose a category.
Press the pbutton to choose the type of
image, and then press the qrbuttons or turn the 7dial to choose a category.
Finish the setup process.
Press the pbutton to choose [Select], and then press the mbutton.
• You can clear the selection of all images in the [Select Range] category by choosing [Deselect] in step 4.
163