z Loading Paper in the Auto Sheet Feeder
1 Flatten the four corners of the paper before loading it.
Note
zAlign the edges of paper neatly before loading. Loading paper without aligning the edges may cause paper jams.
zIf paper is curled, hold the opposing curled corners and gently bend them in the opposite direction until the paper becomes completely flat. See “Paper is curled.” on page 68.
zTo avoid curling, handle paper as follows.
–Put unused paper back into the package and keep them on a level surface.
–Take out only the necessary number of sheets from the package, just before printing.
2 Prepare to load paper.
(1)Open the Paper Support and pull out the Paper Support Extension to support the paper.
(2)Press the Open Button to open the Paper Output Tray.
(3)Pull out the Paper Output Tray Extension completely.
Note
When closing the Paper Output Tray Extension after printing, lift it up slightly.
(4)Press the Paper Feed Switch so that the Auto Sheet Feeder lamp (A) lights.
| (1) |
(2) | (A) (4) |
|
(3)
Note
You can also select the paper source with the printer driver.
For details, refer to the Printer Driver Guide
Before Printing | 13 |