5 Install the ink tank.

(1)Insert the front end of the ink tank into the Print Head.

(2)Press on the mark on the ink tank until the ink tank snaps firmly into place.

(3)Make sure that the ink lamp lights up red.

Important

The printer cannot be used unless all the ink tanks are installed.

*1

(1)

(2)

(3)

*1Make sure the position of the tank matches the label.

6

7

Close the Inner Cover.

Note

Make sure that the Inner Cover is closed. Printing will not start with the Inner Cover open since paper can not be fed properly.

Close the Top Cover.

Note

zIf the ALARM lamp still flashes orange after the Top Cover is closed, see “ALARM Lamp Flashes Orange” on page 76.

zWhen you start printing after replacing the ink tank, Print Head Cleaning is performed automatically. Do not perform any other operations until Print Head Cleaning finishes. The POWER lamp flashes green during cleaning.

Routine Maintenance

33