Canon LiDE 700F manual Print Document Dialog Box 111 of 308 pages

Print Document Dialog Box Page 111 of 308 pages

Print an image at the paper size (enlarged or reduced).

Borderless Printing

Print the image on an entire sheet of paper without margins.

Page Layout Printing (2 on 1)

Layout and print two images on a sheet of paper.

Page Layout Printing (4 on 1)

Layout and print four images on a sheet of paper.

Important

The following settings are available only when using a Canon inkjet printer supporting the

corresponding functions.

-Borderless Printing

-Page Layout Printing (2 on 1)

-Page Layout Printing (4 on 1)

Auto Duplex

Print on both sides of a sheet of paper automatically.

Note

Auto Duplex is displayed when Page Layout is Normal-size Printing or Scaled Printing, and available when Media Type is Plain Paper.

Staple Side

Select a stapling side from the list.

Note

Staple Side is available when Auto Duplex On is set.

Specify Margin...

Specify the width of the margin (0 mm to 30 mm).

Note

Specify Margin... is available when Auto Duplex On is set.

If a page does not fit in one page due to the Specify Margin... setting, the document will be reduced for printing.

Enlarge/Reduce

Enlarge or reduce images to print.

Print a reduced or enlarged image by specifying a scale in increments of 1%.

Auto

Scale is adjusted automatically according to the detected paper width and the selected paper size. Image may be printed rotated 90 degrees depending on its size.

Scale

Select a scale from the list.

Important

At normal-size (100%), some images may be printed small or with some portions cropped. In

that case, select Auto to resize the print in proportion to the paper size.

Paper Size

Select the size of paper for printing. Match the size to the size of the paper set in the printer.

Note

Selectable paper sizes depend on the selected printer.

Media Type

Select the type of paper for printing. Print quality may be fixed depending on the paper type.