Canon LiDE 700F manual Print Dialog Box 152 of 308 pages, Easy Color Matching

Print Dialog Box Page 152 of 308 pages

Note

To reduce moire, set Document Type to Magazine.

Color Mode

Select how to scan the document.

Document Size

Select the size of the document to be scanned.

When you select Custom, a screen in which you can specify the document size appears. Select a Units, then enter the Width and Height and click OK.

Important

When you select Auto Detect, the image may not be scanned at the correct position and size. In that case, change the size to the actual document size (A4, Letter, etc.) and align a corner of the document with the corner at the arrow of the Platen.

Resolution

Select the resolution at which to scan documents. The following scanning resolutions can be specified:

When Document Type is other than film: 150 dpi / 300 dpi / 600 dpi

When Document Type is film: 300 dpi / 400 dpi / 600 dpi / 1200 dpi / 2400 dpi / 4800 dpi

Resolution

Brightness

Adjust the image brightness.

Move the slider to the left to darken and right to brighten the image.

Use the scanner driver

Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan

settings.

Specify...

Click to open the Scan Settings dialog box in which you can make advanced scan settings. Scan Settings Dialog Box

Printer Settings

Printer

Select a printer to use when multiple printers are connected.

Easy Color Matching

Perform color matching between the machine and printer.

This option is available only when using a Canon inkjet printer supporting Easy Color Matching.

Important

This option is not available when Color Mode is Black and White or Grayscale.

Note

It is recommended that you use Photo Paper Pro or Photo Plus Glossy when using Easy Color Matching.

Open a File and Perform Color Matching

This option is available if the Easy Color Matching checkbox is selected.

Open a JPEG file saved in the Adobe RGB color tone, perform Easy Color Matching and display the image in the Print Layout dialog box.

When this checkbox is selected, Scan changes to Open.

Click Open and select a JPEG file saved in the Adobe RGB color tone.