Canon LiDE 700F Frames Are Not Detected Correctly, Select Enlarge/Reduce and click on the image

Frames Are Not Detected Correctly Page 285 of 308 pages

On-screen Manual > Scanning Guide > Troubleshooting > Problems with Scanning Film > Frames Are Not Detected

Correctly

Frames Are Not Detected Correctly

Check 1: Film may be out of position.

Placing Film

Check 2: The Film Adapter Unit may not be placed correctly.

Place the Film Adapter Unit over the frame you want to scan.

Check 3: The film may be extremely dark or bright, or the spaces between frames are extremely narrow (2 mm is standard).

Follow these steps if thumbnail is not displayed correctly when previewed in ScanGear (scanner driver). (The following is an example using the Advanced Mode tab. You can also use the Basic Mode tab.)

1.Click (Thumbnail) on the Toolbar.

The whole film image is displayed.

2.Adjust the displayed cropping frame to outline the frame you want to scan (the frame over which you have placed the Film Adapter Unit).

3.Select (Enlarge/Reduce) and click on the image.

The Preview area is enlarged.