Canon LiDE 700F manual Scan Settings Dialog Box 127 of 308 pages, Grayscale, Black and White

Scan Settings Dialog Box Page 127 of 308 pages

On-screen Manual > Scanning Guide > MP Navigator EX Screens > Scan Settings Dialog Box

Scan Settings Dialog Box

Make advanced settings for scanning with one-click or scanning using the buttons on the machine (Scanner Buttons).

The Scan Settings dialog box opens when you click Specify... in a dialog box for making scan settings.

Note

The displayed items vary by document type and how the screen was opened.

Document Type

Select the type of document to be scanned. When Auto Mode is selected, the document type is automatically detected.

In that case, Color Mode, Document Size, etc. are automatically set as well. When Film(Auto mode) is selected, the film type (negative or positive) is automatically detected.

Important

To scan correctly, select a document type that matches the document to be scanned.

Color Mode

Select how to scan the document.

Color

This mode renders the image in 256 levels (8 bit) of R(ed), G(reen), and B(lue).

Grayscale

This mode renders the image in 256 levels (8 bit) of black and white.

Black and White

This mode renders the image in black and white. The contrast in the image is divided at certain levels (threshold level) into black and white and is rendered in two colors.

Important

You cannot select Black and White if Document Type is film.

Document Size

Select the size of the document to be scanned.

When you select Custom, a screen in which you can specify the document size appears. Select a

Units, then enter the Width and Height and click OK.