Canon LiDE 700F manual Scanning from an Application 244 of 308 pages, Picture type

Scanning from an Application Page 244 of 308 pages

2.In File, click From Scanner or Camera.... (Select the command to scan a document in the application.)

3.Select an image type according to the document to be scanned.

Note

To scan with the values previously set in Adjust the quality of the scanned picture, select

Custom Settings.

4.Click Adjust the quality of the scanned picture and set the preferences as required.

Brightness

Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the image. You can also enter a value (-127 to 127).

Contrast

Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image, thus softening the image. Moving it to the right will increase the contrast of the image, thus sharpening the image. You can also enter a value (-127 to 127).

Resolution (DPI)

Enter the resolution. Specify a value between 50 dpi and 600 dpi.

Resolution

Picture type

Select the type of scan you want for your document.

Reset

Click to restore the original settings.

5.Click Scan.

When scanning is completed, the scanned image appears in the application.

Page top