Canon LV-7255 ￿Part Names of the Remote Control, See page, INPUT Button, 9.MENU Button, 2.POWER Button, 5.INPUT Button, AUTO PC Button, 3.INFO. Button, 4.IMAGE Button

1. Introduction

￿Part Names of the Remote Control

	1
POWER	INFO.
2	3
IMAGE	INPUT AUTO PC
4	6
ASPECT	NO SHOW
7	8
MENU

9	5
	10

11 12

BACK

L-CLICK R-CLICK

13 14

15 VOL PAGE D.ZOOM 17

16	FREEZE	18
		RD-428E

1.Infrared TransmitterDirect the remote control toward the remote sensor on the projector cabinet.2.POWER ButtonWhen the main power is on, you can use this button to turn your projector on.

NOTE: To turn on the projector, press and hold the POWER button for about 1 second.

5.INPUT Button

Selecting from INPUT List

Press and quickly release the INPUT button to dis- play the INPUT list. Each time the INPUT button is pressed, the input source will change as follows: "Com- puter 1", "Computer 2", "Video" (VCR or laser disc player), "S-Video", To display the selected source, press the OK button or allow 2 seconds to elapse.

Detecting the Signal Automatically

Press and hold the INPUT button for a minimum of 2 seconds, the projector will search for the next avail- able input source. Each time you press and hold the INPUT button for a minimum of 2 seconds, the input

source will change as follows:

Computer 1 → Computer 2 → Video → S-Video → Computer1 → ...

6.AUTO PC Button

Use this button to adjust an RGB source for an opti- mal picture.See page 27.7.ASPECT Button

Press this button once to display the Aspect select menu. Keep pressing will change aspect ratios. See page 41.

8.NO SHOW Button

This button turns off the image and sound for a short period of time. Press again to restore the image and sound.

9.MENU ButtonDisplays the menu for various settings and adjust- ments.10.SELECT (Mouse) Button

: Use these buttons to select the menu of the item you wish to adjust.

You can use this button to turn your projector off.NOTE: To turn off the projector, press this button twice.3.INFO. Button

Provides the information on the current signal and pro- jector settings. See page 46.

4.IMAGE Button

Press this button to display the Image adjustment menu to adjust Screen color, Image mode, Brightness, Contrast, Sharpness, Color and Color balance. See pages 39 to 40.

: Use these buttons to change the level of a selected menu item. A press of the button executes the selection.

When an image is magnified, the SELECT button moves the image. See page 29.

This button also works as a computer mouse when the supplied remote mouse receiver is connected with your computer. See page 31.

8