Canon LV-7255 ￿Automatically Optimizing on RGB Image, ￿Turning Up or Down Volume, 3. Projecting an Image (Basic Operation), Adjusting the Image Using Auto PC adjustment

3. Projecting an Image (Basic Operation)

￿Automatically Optimizing on RGB Image

Adjusting the Image Using Auto PC adjustment

Optimizing an RGB image automatically.

Press the AUTO PC button to optimize an RGB image automatically.

[Poor picture]

PO

WER

INPUT

AUTO PC

VOL

-

[Normal picture]

POWER INFO.

IMAGE INPUT AUTO PC

ASPECT NO SHOW

MENU

BACK

Press the AUTO PC button to fine-tune the computer image or to remove any vertical banding that might appear and to reduce video noise, dot interference or cross talk (this is evident when part of your image appears to be shimmer- ing). This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This function also adjusts the clock phase to reduce video noise, dot interference or cross talk. (This is evident when part of your image appears to be shimmering.)

This adjustment may be necessary when you connect your computer for the first time.

NOTE:

Some signals may not be displayed correctly or take time.

•The Auto PC adjustment function does not work for component, composite and S-video signals.

•If the Auto PC adjustment operation cannot optimize the RGB signal, try to adjust Horizontal/Vertical Position Clock and Tracking manually. See pages 45 and 46.

￿Turning Up or Down Volume

Sound level from the speaker and the AUDIO OUT jack (Stereo mini) on the projector can be adjusted.

Decrease volume

Increase volume

	MENU
INPUT	Increase volume
AUTO PC
VOL	VOL
-	+
	Decrease volume
	BACK

L-CLICK R-CLICK

VOL PAGE D.ZOOM

FREEZE

TIP: When no menus appear, the SELECT and buttons on the projector cabinet work as a volume control.

27