3. Projecting an Image (Basic Operation)
Turning off the Projector
To turn off the projector:
1.Press the POWER button on the projector cabinet or the remote control. The “Power Off / OK?” message will appear.
WARNING 
PO | W |
ER |
LAMP 
POWER
IMAGE
ASPECT
MENU
INPUT
AUTO PC
INFO.
INPUT AUTO PC
NO SHOW
2.Press the OK button or press the POWER button again.
The POWER indicator will glow orange. After the projector turns off, the cooling fans keep operating for 30 seconds
Immediately after turning on the projector and displaying an image, you cannot turn off the projector for 60 seconds.
3.Turn off the Main Power switch. The power indicator will go out.
CAUTION
Do not unplug the power cord from the wall outlet or do not turn off the main power under any one of the following circumstances. Doing so can cause damage to the projector:
•While the Hour Glass icon appears.
•While the cooling fans are running. (The cooling fans continue to work for 30 seconds after the projector is turned off)
•While the lamp is lighted.
Power On
WARNING |
|
OWE | |
P | R |
LAMP 
Steady green
light
BACK
Fan running | Standby |
| |
WARNING |
| WARNING |
|
OWE | OWE | ||
P | R | P | R |
LAMP |
| LAMP |
|
Blinking |
| Steady orange | |
orange light | light |
| |
After Use
Preparation: Make sure that the projector is turned off.
1.Unplug the power cord.
2.Disconnect any other cables.
3.Retract adjustable tilt feet if extended.
NOTE: If the spacer is removed from the rear foot before use, attach it again.
4.Cover the lens with the lens cap.
5.Put the projector and its accessories in the supplied soft case.
28
