5. Using On-Screen Menu

￿Menu Descriptions & Functions [Advanced settings]

Enabling Password [Password]This feature turns on or off the Password function.

Unless the correct password is entered, the projector cannot project an image. (→ page 32)

Disabling the Key lock [Key lock]This option turns on or off the Key lock function.

NOTE:

•This Key lock does not affect the remote control and the PC control functions.

•When the Key Lock is Off, pressing and holding the BACK button for about 10 seconds will change the setting to enable.

•Key symbol indicates the Key lock is On.Enabling High Speed Fan Mode [Fan mode]

This option allows you to select two modes for fan speed: High speed mode and Auto mode.

High ......................The built-in fans run at a fixed high speed.
Auto ......................

The built-in fans automatically run at a variable speed according to the internal temperature.

When you wish to cool down the temperature inside the projector quickly, select “High”.

NOTE: Select “High” if you continue to use the projector for consecutive days.Selecting Signal Format [Input signal select][Computer]

Allows you to choose “RGB” for an RGB source such as a computer, or “COMPONENT” for a component video source such as a DVD player. Normally select “RGB/COMPONENT” and the projector automatically detects a component signal. However there may be some component signals that the projector is unable to detect. If this is the case, select “COMPONENT”. Select “SCART” in Computer 1 for the European Scart signal.

[VIDEO & S-VIDEO system select]

This feature enables you to select composite video standards manually. Normally select “Auto”.

When you select the video standard for VIDEO and S-VIDEO, select the video standard from the pull-down menu. This must be done for VIDEO and S-VIDEO respectively.

44