Manuals / Brands / Computer Equipment / Projector / Canon / Computer Equipment / Projector

Canon LV-7255 CAUTION:, •While the lamp is lighted, 2. Installation and Connections, Connecting the Supplied Power Cord, •While the Hour Glass icon appears

1 74

Download 74 pages, 3.92 Mb

2. Installation and Connections

Connecting the Supplied Power CordConnect the supplied power cord to the projector.

First connect the supplied power cord's two-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cord in the wall outlet.

WAR

NING

AMP

PUT

AUTO

-VOL

+OL

IDEO

AUDIO

S-V

IDEO

MONO

AUDIO

ANALOG

AUDIO

IN-1

MONO

OUT

AUDIO IN

SERVICE

ANALOG

IN-2

PORT

M	ENU

To wall outlet ←

Make sure that the prongs are fully inserted into both the AC IN and the wall outlet.

CAUTION:

Do not unplug the power cord from the wall outlet under any one of the following circumstances. Doing so can cause damage to the projector:

•While the Hour Glass icon appears.

•While the cooling fans are running. The cooling fans continue to work for 30 seconds after the projector is turned off.

•While the lamp is lighted.

Contents

Page Safety Cautions Important Information NOTE FOR CUSTOMERS IN THE US Federal Communication Commission Notice Multimedia Projector, Model : LV-7255 –Reorient or relocate the receiving antenna –Increase the separation between the equipment and receiver LAMP HANDLING PRECAUTIONS IF A LAMP EXPLODES DISPOSAL OF WASTE LAMP Lamp Replacement Important Safeguards Installation Do Not Use in the Following Environments Place the projector in a horizontal position Fire and Shock Precautions -Do not use any power cables than the supplied one -Do not bend or tug the power cable excessively -Do not place the power cable under the projector, or any heavy object -Do not cover the power cable with other soft materials such as rugs -Do not heat the power cable Remote Control Precautions Top Features Terminal Panel Features Battery Installation Remote Control Precautions Operating Range for Wireless Remote Control Table of Contents 4. Convenient Features 5. Using On-ScreenMenu 6. Maintenance 7. Appendix 1. Introduction What's in the Box Introduction to the Projector About this user's manual Part Names of the Projector Bottom HINT: To turn the logo upside down, follow the steps below 1. Push one end of the logo gently 3. Release your hold and turn the logo upside down Top Features 1.POWER Button ( ) 2.POWER Indicator Detecting the Signal Automatically Computer 1 → Computer 2 → Video → S-Video → Computer1 → Terminal Panel Features 1.ANALOG IN-1and -2 /Component Input Connec- tor (Mini D-Sub15 Pin) AUDIO IN Mini Jack (Stereo Mini) 2.MONITOR OUT Connector (Mini D-Sub15 Pin) This connector outputs RGB signal in standby mode Part Names of the Remote Control 16.PAGE / Button 17.D. ZOOM (+) (–)Button 18.FREEZE Button 11.OK Button 12.BACK Button Battery Installation 1 Press firmly and slide the battery cover off •Do not place the batteries upside down Operating Range for Wireless Remote Control The infrared signal operates by 2. Installation and Connections Setting Up the Screen and the Projector WARNING •Do not attempt to install the projector yourself Reflecting the Image Making Connections To connect Scart output (RGB) NOTE: Audio signal is not available for this connection Connecting an External Monitor Connecting Your DVD Player with Component Output Connecting Your VCR or Laser Disc Player Connecting the Supplied Power Cord Connect the supplied power cord to the projector CAUTION: •While the Hour Glass icon appears •While the lamp is lighted 3. Projecting an Image (Basic Operation) Turning on the Projector 3. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) To select a menu language, follow these steps: 1.Use the SELECT or button to select one of the 8 languages for the menu 2. Press the OK button to execute the selection Selecting a Source Adjusting the Picture Size and Position Zoom Focus Correcting Keystone Distortion 5. Press the MENU button to close the menu Automatically Optimizing on RGB Image Turning Up or Down Volume Turning off the Projector After Use 4. Convenient Features Turning off the Image and Sound Freezing a Picture Enlarging and Moving a Picture Using the Remote Mouse Receiver Operating your computer’s mouse from the remote control You can operate your computer's mouse from the remote control PAGE / Button: on your computer / Mouse Buttons: moves the mouse cursor on your computer Preventing the Unauthorized Use of the Projector To turn on the projector when Password is enabled: 1.Press the Main Power Switch to the On position (I) 2.Press and hold the POWER button for about 1 second 3.Press the MENU button Enter your password in the Password screen and press the OK button 5. Using On-ScreenMenu Using the Menus 5. Using On-ScreenMenu Menu Elements List of Menu Items Page Menu Descriptions & Functions [Image adjustment] User Adjust (when using User) Selecting Base Setting [Base setting] • Standard • Video • Presentation Menu Descriptions & Functions [Display settings] Menu Descriptions & Functions [Setup] Selecting Menu Language [Language] Selecting Menu Color [Menu color select] Selecting Menu Display Time [Menu display time] Selecting a Color or Logo for No signal screen [No signal screen] Selecting Projector Orientation [Image flip H/V] Menu Descriptions & Functions [Advanced settings] (Advanced settings Page 2) Enabling Power Management [Power management] (not available for Video and S-Video signals) Menu Descriptions & Functions [Information] Menu Descriptions & Functions [Factory default] 6. Maintenance Cleaning or Replacing the Filter Cleaning the Cabinet and the Lens Replacing the Lamp NOTE: Do not remove any screws except these two screws Remove the lamp by holding it 4. Insert a new lamp until the lamp is plugged into the socket Do not use a lamp other than the replacement lamp LV-LP24 This may be ordered from your dealer Finally, select the menu 7. Appendix Troubleshooting 7. Appendix Common Problems & Solutions Problem Check These Items Does not turn on If there is no picture, or the picture is not displayed correctly •Power on process for the projector and the PC •Enabling the computer’s external display •Non-standardsignal output from the computer •Image displayed is incorrect when using a Macintosh Specifications LCD Panel 0.7" p-SiTFT active-matrixwith Micro Lens Array (Aspect 4:3) Resolution 1024 768 pixels* native, up to UXGA with scaling technology Installation Orientation Front / Rear / Ceiling mounted / Rear, Ceiling mounted Dimensions 11.7" (W)4.3" (H)10.8" (D) / 296mm (W)110mm (H)273mm (D) (not including protrusions) Cabinet Dimensions Pin Assignments of D-SubANALOG Input Connector Compatible Input Signal List Relationship between Screen Size and Projection distance PC Control Codes and Cable Connection Troubleshooting Check List In the space below please describe your problem in detail Information on application and environment where your projector is used Projector Model number: Serial No.: CANON INC CANON U. S. A., INC CANON CANADA, INC CANON LATIN AMERICA, INC CANON MEXICANA, S. de R. L. de C