(1)Date*1
Activate/deactivate to print the shooting date on a photo.
(2)File no.*1
Activate/deactivate to print the file no. on a photo.
Note
It is not possible to print both the shooting date and the file no. under the following conditions:
zLayout print is selected as a print function in the memory card mode, and/or
zCredit card is selected in Page size.
Under these conditions, even if both Date ON and File no. ON are set, only the shooting date will be printed. If you want to print the file no., select Date OFF.
(3)Red eye correc.*1
Corrects red eyes in portraits caused by flash photography.
(4)Vivid photo*1
Makes green and blue more lively.
(5)Photo opt. pro*1
Automatically optimizes brightness and tone of a photo.
(6)Noise reduction*1
Reduces the noise on blue areas like the sky as well as on black areas.
(7)Face brightener
Brightens a darkened face on the photo taken against the light.
(8)Image optimizer*1
Corrects and smooths the jagged contours for printing.
(9)Brightness Adjust brightness.
(10)Contrast Adjust contrast.
(11)Color hue Adjust color hue.
For example, you can increase red or yellow to adjust the skin tone.
(12)Effect*1
Applies special effects to the photo, such as printing in sepia tones or with a sketch illustration like effect.
(13)Fade restoration*2
Corrects the color when printing photos that have faded or color cast over time.
*1 Can be selected only in memory card mode.
*2 Can be selected only in easy photo reprint mode.
Printing from a Memory Card | 31 |